Arm and Elbow protectors

Product description, below we will inform you about the different advantages of the latest HARA CHAIR models.

1. The NIE or NWL models with the split, ergonomically shaped backrest support the shoulder girdle and neck and thus prevent tension. The back cushions are movable and adapt optimally to the back depending on the sitting position. For the best possible comfort, the back cushions can be adjusted in height and width. The NIE or NWL model is suitable for everyone who sits a lot and for long periods of time. The difference between NIE and NWL is based on the material.
What alternatives are there? If you don't have back problems but want to prevent discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If you have intervertebral disc problems or a pronounced hollow back, depending on your symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support (see models ZEN, THA, DOL, CAE).
The NWL upholstery cover is made of PVC synthetic leather, which is extremely robust and easy to care for. The NIE upholstery cover is covered with a polyester fabric. Both the artificial leather and the polyester covers are particularly breathable due to their honeycomb structure and thus prevent sweating. A special foam is used in the seat, the climate slats have a heat-regulating effect and dissipate moisture. The user always feels comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150 kilograms and also 65 mm special castors for hard floors (laminate/PVC, tiles/granite, parquet/wood and floor protection mat) or 65 mm special casters for soft floors (carpet/carpet, felt, sisal) for an additional charge. See price list with possible additional options.

2. The ZEN-LS model has built-in lumbar support in the back cushion. This model is very suitable for alleviating complaints in the lower back area (e.g. herniated disc, lumbar spine syndrome) and for supporting the spine in the lumbar region. The ZEN-LS model with built-in lumbar support is suitable for anyone who sits a lot and wants to support their lumbar spine. If you have a severe hollow back or have had a herniated disc, this model primarily relieves discomfort in the lower back area. Thanks to the height-adjustable.
Backrest, the support can be optimally adjusted to the lumbar region. The best way to test whether the ZEN-LS model is the right chair for the user is by adding a rolled up towel or a small pillow to the lumbar area of a standard office chair. The ZEN-LS is recommended for people who find this pleasant.
What alternatives are there? If you don't have back problems but want to prevent discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If you have intervertebral disc problems or a pronounced hollow back, depending on your symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support (see models ZEN, THA, DOL, CAE).
The ZEN-LS model is covered with a polyester fabric and is particularly breathable due to its honeycomb structure, thus preventing sweating. A special foam is used in the seat, the climate slats have a heat-regulating effect and dissipate moisture. The user always feels comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150 kilograms and also 65 mm special castors for hard floors (laminate/PVC, tiles/granite, parquet/wood and floor protection mat) or 65 mm special casters for soft floors (carpet/carpet, felt, sisal) for an additional charge. See price list with possible additional options

3. The ZEN model supports the lumbar area and shoulder girdle with a “light lumbar support” in its ergonomic S shape, which provides pleasant support for the lumbar area and relieves the strain on the shoulders. Many people with a hollow back or back problems after a herniated disc find the light lumbar support pleasantly relieving. In addition, the height-adjustable backrest can be optimally adapted to each person's size and needs.
What alternatives are there? If you don't have back problems but want to prevent discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If you have intervertebral disc problems or a pronounced hollow back, depending on your symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support (see models ZEN, THA, DOL, CAE).
The ZEN model is covered with a polyester fabric and is particularly breathable due to its honeycomb structure, thus preventing sweating. A special foam is used in the seat, the climate slats have a heat-regulating effect and dissipate moisture. The user always feels comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150 kilograms and also 65 mm special castors for hard floors (laminate/PVC, tiles/granite, parquet/wood and floor protection mat) or 65 mm special casters for soft floors (carpet/carpet, felt, sisal) for an additional charge. See price list with possible additional options.

4. The THA model with the ergonomic backrest made of air-permeable mesh and adjustable lumbar support in height and depth, this office chair primarily supports the lower back area. The strength of the lumbar support can be individually adjusted using an integrated rotary knob or removed if necessary. Without lumbar support, the mesh backrest supports the back individually.
The backrest is not height-adjustable in this model, but with the help of the synchronous mechanism and the adjustable seat depth, the best back position and the angle of inclination can be optimally adjusted (with a height-adjustable backrest see models NIE, NWL, ZEN-LS and ZEN).
What alternatives are there? If you don't have back problems but want to prevent discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If you have intervertebral disc problems or a pronounced hollow back, depending on your symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support (see models ZEN, THA, DOL, CAE).
The THA model is covered with a polyester fabric and is particularly breathable due to its honeycomb structure and thus prevents sweating. A special foam is used in the seat, the climate slats have a heat-regulating effect and dissipate moisture. The user always feels comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150 kilograms and also 65 mm special castors for hard floors (laminate / PVC, tiles / granite, parquet / wood and floor protection mat) or 65 mm special casters for soft floors (carpet/carpet, felt, sisal) are available at an additional cost. See price list with possible additional options.

5. The DOL model follows the natural S-curve of the spine with a continuous backrest. The well-padded, ergonomic backrest not only supports the shoulders and thus prevents tension, it also has light lumbar support, which provides pleasant support, especially for the lower back. The backrest is not height-adjustable in this model, but with the help of the synchronous mechanism and the adjustable seat depth, the best back position and the angle of inclination can be optimally adjusted (with a height-adjustable backrest see models NIE, NWL, ZEN-LS and ZEN).
What alternatives are there? If you don't have back problems but want to prevent discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If you have intervertebral disc problems or a pronounced hollow back, depending on your symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support (see models ZEN, THA, DOL, CAE).
The DOL model is covered with a polyester fabric and is particularly breathable due to its honeycomb structure, thus preventing sweating. A special foam is used in the seat, the climate slats have a heat-regulating effect and dissipate moisture. The user always feels comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150 kilograms and also 65 mm special castors for hard floors (laminate/PVC, tiles/granite, parquet/wood and floor protection mat) or 65 mm special casters for soft floors (carpet/carpet, felt, sisal) for an additional charge. See price list with possible additional options.

6. The CAE model, with its ergonomic S-shape, supports both the lumbar area and the shoulder area with “light lumbar support” and is at the same time very comfortable due to its padding. Thanks to the 85 cm high backrest and wide, stable construction, the CAE model is particularly suitable for tall and heavy people. The backrest is not height-adjustable in this model, but with the help of the synchronous mechanism and the adjustable seat depth, the best back position and the angle of inclination can be optimally adjusted (with a height-adjustable backrest see models NIE, NWL, ZEN-LS and ZEN).
What alternatives are there? If you don't have back problems but want to prevent discomfort, an office chair for dynamic sitting is recommended (see models NIE or NWL). If you have intervertebral disc problems or a pronounced hollow back, depending on your symptoms, we recommend a model with strong (see model ZEN-LS) or light lumbar support (see models ZEN, THA, DOL, CAE).
The CAE upholstery cover is made of PVC synthetic leather, which is extremely robust and easy to care for. The upholstery cover is particularly breathable due to its honeycomb structure and thus prevents sweating. A special foam is used in the seat, the climate slats have a heat-regulating effect and dissipate moisture. The user always feels comfortable.
The height should not be higher than 200 cm and the maximum load capacity with the standard base is 120 kg. We optionally offer a heavy-duty base that can hold up to 150 kilograms and also 65 mm special castors for hard floors (laminate/PVC, tiles/granite, parquet/wood and floor protection mat) or 65 mm special casters for soft floors (carpet/carpet, felt, sisal) for an additional charge. See price list with possible additional options.

7. The LOB model, the three-part HARA CHAIR, brings the advantages of a two-dimensionally movable office chair to the waiting room. The seats of the three-seater are divided and enable dynamic sitting. In contrast to waiting chairs with a rigid seat plate, the weight of the upper body is distributed effectively. This generally reduces the pressure on the pelvis and spine and significantly improves blood circulation in the pelvic and spine area. The LOB upholstery cover is made of PVC synthetic leather, which is extremely robust and easy to care for. The upholstery cover is particularly breathable due to its honeycomb structure and thus prevents sweating. A special foam is used in the seat, the climate slats have a heat-regulating effect and dissipate moisture. The user always feels comfortable.

The patented pressure-relieving function of the split seat is the same for all HARA CHAIR models. The advantages and functionality of pressure relief are explained in detail on our website.

For further information please contact us, we will be happy to advise you personally to find the right HARA CHAIR model for you.

Back to HARA CHAIR shop